KTM F8201T5 Setup Instructions

SETUP 2
13
F01636-10
–
Connect positive cable
bt
to the 12-V battery.
Guideline
Screw, battery termi-
nal
M5 2.5 Nm
(1.84 lbf ft)
–
Connect negative cable
ck
to the 12 V battery.
Guideline
Screw, battery termi-
nal
M5 2.5 Nm
(1.84 lbf ft)
Contact disks
H
must be mounted under screws
cl
and
cable sockets
cm
with the claws toward the battery termi-
nal.
–
Slide positive terminal cover
cn
over the positive terminal.
– Charge the 12-V battery. ( p. 20)
– Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
F03447-01
(SX‑F EU/US, XC-F US)
– Stick displacement sticker on the left and right of the side
cover.
– Refuel. ( p. 24)
– Attach the stickers included in the scope of supply (optional).
– Position all controls in their exact positions on the handlebar.
Tighten all screws.
– Remove the remaining film, padding, the corrugated card-
board, and the other packaging material.
– Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.

KTM F8201T5 Specifications

General

Brand	KTM
Model	F8201T5
Category	Motorcycle
Language	English