Need help?Do you have a question about the KTM Freeride 250 F and is the answer not in the manual?
Detailed steps for unpacking and setting up the V2 and V12 models.
Instructions for unpacking and setting up the V2 vehicle, including safety notes.
Instructions for unpacking and setting up the V12 vehicle.
Instructions for installing the front wheel, including safety and torque.
Safety and procedures for recharging the battery.
Safety precautions and procedures for refueling the vehicle.
Detailed list of torque specifications for various chassis components.
Detailed steps for unpacking and setting up the V2 and V12 models.
Instructions for unpacking and setting up the V2 vehicle, including safety notes.
Instructions for unpacking and setting up the V12 vehicle.
Instructions for installing the front wheel, including safety and torque.
Safety and procedures for recharging the battery.
Safety precautions and procedures for refueling the vehicle.
Detailed list of torque specifications for various chassis components.
General| Bore x Stroke | 78 mm x 52.3 mm |
|---|---|
| Starter | Electric starter |
| Transmission | 6-speed |
| Cooling | Liquid cooled |
| Rear Suspension | WP Xplor PDS shock absorber |
| Seat Height | 915 mm |
| Compression Ratio | 12.8:1 |
| ABS | No |
| Engine Type | Single cylinder, 4-stroke |
| Displacement | 249.91 cc |
| Front Brake | Disc brake, 260 mm |
| Fuel Tank Capacity | 5.5 liters |
| Fuel System | Electronic fuel injection (EFI) |
To Next Page