KTM RC 390 2016 - 3.10 Installing the Motorcycle Battery

3 WORK
9
311910-10
Main work
– Connect the battery charger to the battery. Set the battery
charger.
Alternative 1
EU battery charger XCharge-professional
(00029095050)
Alternative 2
US battery charger XCharge-professional
(00029095051)
Alternative 3
UK battery charger XCharge-professional
(00029095052)
Alternative 4
CH battery charger XCharge-professional
(00029095053)
Info
Follow the instructions of the charger and the manual.
– Disconnect the battery charger after charging the battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Charge the battery regularly
when the motorcycle is not
in use
3 months
Finishing work
– Mount the front rider's seat. ( p. 5)
– Set the clock. ( p. 12)
3.10 Installing the battery
L02157-10
Main work
– Position the battery in the battery holder.
Guideline
The terminals of the battery must face upwards.
Battery (ETZ-9-BS)
–
Reconnect rubber band
1
.
–
Position the positive cable
2
and mount and tighten the
screw.
–
Position positive terminal cover
3
.