3 WORK
8
L02191-10
Main work
–
Remove screw
1
with washer.
– Lift and take off the passenger seat.
3.4 Mounting the passenger seat
K00021-10
Main work
–
Attach hook
1
into bracket
2
.
– Lower the front of the passenger seat and push back.
L02191-11
–
Mount and tighten screw
3
with the washer.
Guideline
Screw, passenger
seat
M6 7 Nm (5.2 lbf ft)
Warning
Danger of accidents The seat can come loose from the
anchoring if it is not mounted correctly.
– After assembly, check whether the seat is correctly
locked and cannot be pulled up.
– Check that the passenger seat is mounted correctly.
Finishing work
– Mount the front rider's seat. ( p. 9)
3.5 Removing the front rider's seat
K00708-10
–
Insert the ignition key in seat lock
1
and turn it clockwise.
– Raise the rear of the front rider's seat, pull it toward the rear,
and remove it upward.
– Remove the ignition key from the seat lock.
To Next Page
Loading...
