KUBE SYSTEMS KS Clock - Operation: Time and Alarm Settings; Daylight Saving Time and Alarm Setup

— 12 —
OPERATION
Setting the Alarm Time
u
Press and release the Alarm SET
button on the top of the unit; the Alarm
icon will flash in the display.
w
Within 3 seconds, press the MIN
button to set the minutes. When done,
wait a few seconds and the Alarm icon
will stop flashing.
x
To activate the alarm, press the Alarm
ON/OFF button once; the unit will beep
and the Alarm icon will appear in the
display.
v
Within 3 seconds, press the HOUR
button to set the alarm hour, making
sure to set the correct AM/PM.
u
To enable daylight saving time, press
the DST +1 button; the time will
increase by one hour.
v
To cancel daylight saving time, press
the DST –1 button; the time will
decrease by one hour.
TIME
SET
HOUR
MIN
DST
+1
DST
-1
TIME
SET
HOUR
MIN
DST
+1
DST
-1
DST (Daylight Saving Time)