To Next PageTo Next PageWhat to do if Kubota Grinder is digging into utility lines?
If the Kubota Grinder is digging into electrical, gas, water, and cable lines, it is likely because utility lines were not located before digging. Call Dig Safe at 811 and have utility companies flag the location of underground utilities before digging.
What to do if the cutting wheel won’t turn on my Kubota AP-SSG2524?
If the cutting wheel won’t turn, the quick disconnect couplers may be attached to the wrong hydraulic hoses. Try switching the quick disconnect couplers on the hydraulic hoses. Also, check if the hydraulic hoses are not coupled to the skid steer and reattach quick disconnect couplings to the skid steer if needed. Finally, examine the hydraulic hoses and/or fittings for damage and replace any damaged components.
Why are the hydraulic hoses on my Kubota AP-SSG2524 Grinder stretched and/or damaged?
Hydraulic hoses may be stretched and damaged because they are catching on tree limbs, debris, or other solid objects. Replace the hydraulic hoses and stay away from objects that can catch on them. Stop immediately if hoses are catching on an object and remove the object. If helpful, readjust the hose routing. Another reason may be that the hoses are too short, in that case you should make longer hoses.
Why does the cutting wheel keep stopping on my Kubota AP-SSG2524?
The cutting wheel may stop turning because you are making deep cuts in the stump. Try making shallower cuts instead. The stump may also be made of very hard wood or has hardened with age, so take smaller bites and go slower while articulating the cutting head across the top of the stump. Ensure that the cutting teeth are installed correctly; if not, turn them around. If the carbide tips are dull, replace them with new teeth or have them sharpened by a professional. Insufficient skid steer pressure could also be the cause, so hitch the stump grinder to a skid steer with a higher pressure rating. Lastly, missing carbide tips can cause this issue, so replace the teeth if any are missing.
How to stop my Kubota Grinder from vibrating excessively?
Excessive vibration can occur if you are making cuts with the skid shoes off the ground. Lower the hitch until the skid shoes are firmly planted on the ground. Also, avoid backing up while making a cut; if available, set the skid steer park brake. Making deep cuts in the stump can also cause vibration, so make shallower cuts instead.
Why is the cutting wheel on my Kubota Grinder turning too slow?
If the cutting wheel turns too slow, the skid steer pressure may be too low. Try hitching the Stump Grinder to a skid steer with a higher pressure rating. Also, the skid steer oil flow volume may be low, so hitch the Stump Grinder to a skid steer with a higher flow volume.
What to do if carbide cutting tips are missing on my Kubota AP-SSG2524?
If the carbide cutting tips on the end of the teeth are missing, it is likely because the cutting teeth are installed on the cutting wheel backwards. Replace the teeth with missing carbide tips and install the teeth with the carbide tips leading.
What causes damaged hydraulic fittings on a Kubota AP-SSG2524?
Damaged hydraulic fittings can occur if the hydraulic hoses are catching on tree limbs, debris, or other solid objects. Replace the hydraulic fittings and stay away from objects that can catch on the hydraulic hoses. Stop immediately if hoses are catching and readjust the hose routing if helpful.
What to do if Kubota Stump Grinder is loosely attached to the Skid Steer?
If the Stump Grinder is loosely attached to the Skid Steer, it is likely because the Quick Attach Hitch is not properly attached to the skid steer. Reattach the hitch before using the Stump Grinder.
Why aren't the articulation and tilt cylinders operating on my Kubota Grinder?
If the articulation and tilt cylinders do not operate, it may be due to loose wiring harness connections. Reconnect all wire harness connections. Alternatively, wires in the wiring harness may be broken or chewed through by rodents; in this case, replace or repair the broken or damaged wiring harness.
Emphasizes careful operation and understanding of the manual for accident prevention.
Highlights the importance of the safety alert symbol for potential hazards.
Warns about potential tragedies if operators are not alert to children's presence.
Provides procedures for safely shutting down and storing the skid steer.
Advises contacting utility companies before digging to locate underground services.
Details safe practices for towing and transporting equipment, including speed limits.
Covers safe practices for tire changing and maintenance.
Outlines essential safety steps before performing maintenance or repairs.
Recommends having first aid kits, fire extinguishers, and emergency numbers.
Lists essential PPE such as safety glasses, shoes, and hearing protection.
Recommends using SMV signs and flashing lights for visibility on public roads.
Warns about the dangers of escaping high-pressure hydraulic fluid.
Stresses the importance of using seat belts and ROPS for operator protection.
Prohibits carrying riders on the skid steer or attachment.
Details health risks of silica dust and precautions to take.
Provides guidelines for safely handling and storing chemicals.
Describes the uses and capabilities of the Stump Grinder attachment.
Provides guidance on how to read and understand the operator's manual.
Defines terms like 'right' and 'left' as used in the manual.
Explains the meaning of 'IMPORTANT' and 'NOTE' indicators in the manual.
Information on warranty registration and customer service.
Instructs users to record the model and serial number for service.
Provides steps for obtaining additional help and support.
Details the skid steer specifications needed for attachment.
Refers to the torque values chart for proper hardware tightening.
Preparation steps and advice before beginning assembly.
Information on hydraulic quick disconnect couplers for attachment.
Instructions for safely connecting the stump grinder to the skid steer.
Procedure for connecting the hydraulic hoses to the attachment.
Wiring instructions for solenoids controlling cylinders.
Ensuring hoses and wiring do not interfere with machine movement.
Procedure for adjusting the height of the skid shoes.
List of checks to perform before operating the stump grinder.
Pre-operation checks on the attachment and skid steer.
Critical safety guidelines to follow during operation.
Step-by-step instructions for operating the stump grinder.
Safety precautions for transporting the stump grinder.
Procedure for safely detaching the stump grinder from the skid steer.
Additional tips and guidance for efficient operation.
Details optional electrical control harnesses for operation.
Installation of 14-pin Deutsch harness for skid steers.
Installation of 2-pin Deutsch harness and control box.
General assembly steps for accessory kits.
Prerequisites before installing accessory kits.
Instructions for mounting the control box inside the cab.
Steps to connect the control system to the skid steer power.
Procedure for routing the control wire harness.
Connecting the solenoid harness to the attachment.
Details on the 2-eyelet harness for skid steers without specific couplers.
Routing the primary wire harness along the loader arm.
Detailed steps for routing harness #1 along the loader arm.
Guiding the wire harness into the engine room.
Routing secondary harnesses and power cord through the cab.
Routing wiring and power cord under the cab.
Guiding the secondary wire harness into the engine room.
Routing the power cord to the engine room and battery.
Instructions for mounting the control box for the 2-eyelet harness.
Connecting the secondary wire harness to the primary one.
Connecting solenoid wires for tilt and rotate cylinders.
Information on the CTL/SS coupler for case drain lines.
Details on available flat face hydraulic couplers.
General advice on proper servicing for attachment longevity.
Key maintenance tasks for the skid steer's hydraulic system.
Instructions for inspecting and replacing cutting wheel teeth.
Procedures for preparing the attachment for long-term storage.
Identifies lubrication points and intervals for the attachment.
Detailed technical specifications and capacities of the SSG2524 model.
Highlights the key features and advantages of the SSG2524 model.
Identifies common problems and their solutions.
Provides torque specifications for various bolt sizes.
Specific torque values for tooth mounting bolts.
Details the warranty coverage and terms for the product.
Provides legal disclaimers regarding information accuracy and liability.
General