To Next PageTo Next PageWhy does the articulation cylinder operate backwards on my Kubota AP-SSG2524 Grinder?
If the articulation cylinder operates backwards, the brown and white connectors at the solenoid may be hooked up backwards. Switch the brown and white connectors at the solenoid.
Why does the tilt cylinder operate backwards on my Kubota Grinder?
If the tilt cylinder operates backwards, the red and green connectors at the solenoid may be hooked up backwards. Switch the red and green connectors at the solenoid.
Emphasizes careful operation and understanding of the manual for accident prevention.
Highlights the importance of the safety alert symbol for potential hazards.
Warns about potential tragedies if operators are not alert to children's presence.
Provides procedures for safely shutting down and storing the skid steer.
Advises contacting utility companies before digging to locate underground services.
Details safe practices for towing and transporting equipment, including speed limits.
Covers safe practices for tire changing and maintenance.
Outlines essential safety steps before performing maintenance or repairs.
Recommends having first aid kits, fire extinguishers, and emergency numbers.
Lists essential PPE such as safety glasses, shoes, and hearing protection.
Recommends using SMV signs and flashing lights for visibility on public roads.
Warns about the dangers of escaping high-pressure hydraulic fluid.
Stresses the importance of using seat belts and ROPS for operator protection.
Prohibits carrying riders on the skid steer or attachment.
Details health risks of silica dust and precautions to take.
Provides guidelines for safely handling and storing chemicals.
Describes the uses and capabilities of the Stump Grinder attachment.
Provides guidance on how to read and understand the operator's manual.
Defines terms like 'right' and 'left' as used in the manual.
Explains the meaning of 'IMPORTANT' and 'NOTE' indicators in the manual.
Information on warranty registration and customer service.
Instructs users to record the model and serial number for service.
Provides steps for obtaining additional help and support.
Details the skid steer specifications needed for attachment.
Refers to the torque values chart for proper hardware tightening.
Preparation steps and advice before beginning assembly.
Information on hydraulic quick disconnect couplers for attachment.
Instructions for safely connecting the stump grinder to the skid steer.
Procedure for connecting the hydraulic hoses to the attachment.
Wiring instructions for solenoids controlling cylinders.
Ensuring hoses and wiring do not interfere with machine movement.
Procedure for adjusting the height of the skid shoes.
List of checks to perform before operating the stump grinder.
Pre-operation checks on the attachment and skid steer.
Critical safety guidelines to follow during operation.
Step-by-step instructions for operating the stump grinder.
Safety precautions for transporting the stump grinder.
Procedure for safely detaching the stump grinder from the skid steer.
Additional tips and guidance for efficient operation.
Details optional electrical control harnesses for operation.
Installation of 14-pin Deutsch harness for skid steers.
Installation of 2-pin Deutsch harness and control box.
General assembly steps for accessory kits.
Prerequisites before installing accessory kits.
Instructions for mounting the control box inside the cab.
Steps to connect the control system to the skid steer power.
Procedure for routing the control wire harness.
Connecting the solenoid harness to the attachment.
Details on the 2-eyelet harness for skid steers without specific couplers.
Routing the primary wire harness along the loader arm.
Detailed steps for routing harness #1 along the loader arm.
Guiding the wire harness into the engine room.
Routing secondary harnesses and power cord through the cab.
Routing wiring and power cord under the cab.
Guiding the secondary wire harness into the engine room.
Routing the power cord to the engine room and battery.
Instructions for mounting the control box for the 2-eyelet harness.
Connecting the secondary wire harness to the primary one.
Connecting solenoid wires for tilt and rotate cylinders.
Information on the CTL/SS coupler for case drain lines.
Details on available flat face hydraulic couplers.
General advice on proper servicing for attachment longevity.
Key maintenance tasks for the skid steer's hydraulic system.
Instructions for inspecting and replacing cutting wheel teeth.
Procedures for preparing the attachment for long-term storage.
Identifies lubrication points and intervals for the attachment.
Detailed technical specifications and capacities of the SSG2524 model.
Highlights the key features and advantages of the SSG2524 model.
Identifies common problems and their solutions.
Provides torque specifications for various bolt sizes.
Specific torque values for tooth mounting bolts.
Details the warranty coverage and terms for the product.
Provides legal disclaimers regarding information accuracy and liability.
General