Kubota BX2350 User Manual

35HYDRAULIC UNIT
ENGLISH
BHydraulic Control Unit Use Reference Chart
In order to handle the hydraulics properly, the operator must be familiar with the following. Though this information may not
be applicable to all types of implements and soil conditions, it is useful for general conditions.
Implement
Soil condition
(1) Hydraulic control lever
Gauge wheel
(1) Check chains
Remarks
Moldboard plow
Light soil
Medium soil
Heavy soil
Hydraulic control
YES/NO Loose
Adjust the check
chains so that
the implement
can move 5 to 6
cm laterally.
Check chains
should be tight
enough to
prevent
excessive
implement
movement when
implement is in
raised position.
Disc plow ---
Harrower (spike,
springtooth, disc
type)
---
Sub-soiler......
Weeder, ridger.....
---
YES
Tighten
Earthmove, digger
scraper, manure
fork rear carrier....
YES/NO
For implements
with gauge
wheels, lower
the position
control lever all
way.
Mower (mid-and
rear-mount type)
Hayrake, tedder...

Kubota BX2350 Specifications

General

Engine Type	Diesel
Engine Power	23 hp
Transmission	Hydrostatic
Fuel Capacity	6.6 gallons
PTO Power	17.7 hp
Wheelbase	55.1 inches
Drive	4WD
Engine Model	Kubota D902
Rated RPM	3200 rpm
Hydraulic System Type	Open center
3-Point Hitch	Category I
PTO Speed	540 rpm
Width	44.5 inches
Tire Size (Front)	18x8.5-10
Tire Size (Rear)	26x12-12
Displacement	54.8 cu in (898 cc)