Kubota BX2350 User Manual

Name: Kubota BX2350
Brand: Kubota
Rating: 4 (1 reviews)

101 pages

To Next Page

To Previous Page

PERIODIC SERVICE62

ENGLISH

A If the fuel line is removed, be sure to properly bleed the

fuel system.

(See "Bleeding Fuel System" in "SERVICE AS

REQUIRED" in "PERIODIC SERVICE" section. )

BAdjusting Fan Belt Tension

To avoid personal injury:

A Be sure to stop the engine and remove the key

before checking belt tension.

1. Stop the engine and remove the key.

2. Apply moderate thumb pressure to belt between

pulleys.

3. If tension is incorrect, loosen the alternator mounting

bolts and, using a lever placed between the alternator

and the engine block, pull the alternator out until the

deflection of the belt falls within acceptable limits.

4. Replace fan belt if it is damaged.

(1) Fuel pump

(2) Fuel filter

(3) Pipe clamps

Proper fan belt

tension

A deflection of between 7 to 9 mm

when the belt is pressed in the

middle of the span.

(1) Bolt (A) Check the belt tension

Questions and Answers:

Need help?

Do you have a question about the Kubota BX2350 and is the answer not in the manual?

General