TRANSAXLE
G23-2, G26-2, WSM
2-S33
Differential Gear Assembly
1. Remove the differential gear (3) and the differential rear case
(4) from the transmission case (2).
(When reassembling)
• Install the same shim (10) to the same position.
• After installing the shim, check and adjust the differential gear
backlash.
9Y1210892TXS0036US0
(1) Pinion Shaft
(2) Transmission Case
(3) Differential Gear
(4) Differential Rear Case
(5) Differential Side Gear
(6) Rear Pinion Shaft
(7) Differential Pinion Gear
(8) Ball Bearing
(9) Spring Pin
(10) Shim
(11) Differential Pinion Collar
To Next Page
Loading...
Need help?
General
