95PERIODIC SERVICE
A Do not remove the bolt(A).
BAdjusting Front Axle Pivot
If the front axle pivot pin adjustment is not correct, front
wheel vibration can occur causing vibration in the steering
wheel.
C Adjusting procedure
Loosen the lock nut, screw-in the adjusting screw until
seated, then tighten the screw with an additional 1/6 turn.
Re-tighten the lock nut.
EVERY 800 HOURS
BAdjusting Engine Valve Clearance
Consult your local KUBOTA Dealer for this service.
EVERY 1500 HOURS
BChecking Fuel Injection Nozzle (Injection
Pressure)
Consult your local KUBOTA Dealer for this service.
EVERY 3000 HOURS
BChecking Turbocharger
Consult your local KUBOTA Dealer for this service.
BChecking Injection Pump
Consult your local KUBOTA Dealer for this service.
BChecking Intake Air Heater
[M8540]
Consult your local KUBOTA Dealer for this service.
(1) Drain plug
(2) Filling plug
(1) Bolt(A)
(1) Adjusting screw
(2) Lock nut
To Next Page
Loading...
Need help?
General
