92
RH418-8135-3
07/2015
Operation
Operating the working lights
The starter switch is in the RUN position.
Press the working light button (1) to the ON position. The work-
ing lights on the cab are turned on.
To switch off the working lights on the cab, press the button to
the OFF position.
Operating the battery cut-off switch
In order for the excavator to be operated, the battery cut-off switch
(1) must be in the ON position.
A ON
B OFF
During work on public roads other road users must not
be bli
nded.
If the battery cut-off switch is in the OFF position, most
of the
electrically powered functions will be turned off
(e.g. horn, working lights, etc.).
The user settings for the display and control unit are
sa
ved, and the battery discharges itself only minimally.