How to troubleshoot insufficient engine power in Kubota U35-4?
If your Kubota Excavators has insufficient engine power, there are a couple of things to check. First, ensure that the fuel level is adequate and add fuel if necessary. Second, inspect the air cleaner for clogs and clean the air filter element if needed.
What to do if Kubota U35-4 engine suddenly stops?
If your Kubota Excavators engine suddenly stops, check the fuel level and add fuel if necessary. Also, purge the fuel system.
Why is the boom, arm, bucket, drive, swing and dozer power too low on my Kubota U35-4?
If the boom, arm, bucket, drive, swing, and dozer power is too low on your Kubota Excavators, it could be due to a low hydraulic oil level, requiring you to add oil. Another possibility is leakages in the hoses and/or joints, which would necessitate replacing the hose or joint.
Why is my Kubota U35-4 Excavators overheating and the water temperature is in the red zone?
If your Kubota Excavators is overheating, with the water temperature in the red zone, several factors could be responsible. A damaged cylinder head gasket causing coolant loss requires replacement. Low engine oil level needs to be corrected by filling to the prescribed level. Maladjustment of fuel injection requires readjustment of ignition timing. Finally, the use of poor fuel necessitates switching to the prescribed fuel.
Why does my Kubota Excavators have abnormal exhaust gas color?
Abnormal exhaust gas color in your Kubota Excavators may be due to poor fuel quality, so use high quality fuel. It could also be caused by too much engine oil; in that case, drain the engine oil to the prescribed level.
Why is there a deviation of drive direction in my Kubota Excavators?
If your Kubota Excavators is experiencing a deviation in drive direction, it could be due to stones blocking the tracks, which need to be removed. Alternatively, the track may be too loose or too tight, requiring adjustment accordingly.
General| Brand | Kubota |
|---|---|
| Model | U35-4 |
| Category | Excavators |
| Language | English |
Pre-operation checks and understanding limitations.
Safe procedures for operating the excavator and avoiding hazards.
Identification and meaning of safety labels on the machine.
Understanding warning lamps, error messages, and indicators.
Proper use of safety features like the pilot control lock lever.
To Next Page
