(1) Rear axle
(2) Oil seal
(3) Internal circlip
(4)
Ball bearing
(5) Rear axle case
1. Draw out the oil seal with a screw driver.
2. Remove the internal circlip from the rear axle case.
3. Draw out the rear axle from the rear axle case.
(When reassembling)
• Do not damage the oil seal.
5.4.5 Removing rear axle case (R.H.)
(2) 37T spiral bevel gear
(3) 10T final gear shaft (Brake
shaft)
(4) 66T final gear
1.
Remove the rear axle case (R.H.) mounting bolts.
4. TRANSAXLE
 SERVICING
5. Disassembling and assembling
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
To Next Page
Loading...
Need help?
General
