What to do if engine does not stop when key switch is turned off on Kubota Lawn Mower?
If the engine on your Kubota Lawn Mower does not stop when the key switch is turned “OFF”, the fuse may have blown (20 A). Replace the fuse.
Why doesn't the starter function on my Kubota Lawn Mower?
If the starter on your Kubota Lawn Mower does not function, there are several potential causes. It could be due to battery overuse, resulting in dim lights, in which case you should charge the battery sufficiently and adjust the fan belt. Poor terminal connections can also prevent the starter from working; clean the terminal and tighten it securely. Finally, the battery life may have expired, requiring you to replace the battery.
Why are the exhaust fumes colored on my Kubota Lawn Mower?
If you notice colored exhaust fumes from your Kubota Lawn Mower, it could be due to poor fuel quality, too much oil, or an overloaded engine. Try changing the fuel and fuel filter, ensuring you use the proper amount of oil, and reducing the engine load. Alternatively, the inside of the exhaust muffler might be damp from fuel, there could be an issue with the injection nozzle, or again, the fuel quality might be poor. In this case, heat the muffler by applying load to the engine, check the injection nozzle, and change the fuel and fuel filter.
Why is my Kubota Lawn Mower engine overheating?
If your Kubota Lawn Mower engine overheats, it could be due to several reasons. The engine might be overloaded, so try lowering the speed or reducing the load. Check the coolant level and fill the cooling system to the correct level, inspecting the radiator and hoses for any loose connections or leaks. A loose or damaged fan belt can also cause overheating, so adjust or replace it as needed. Additionally, a dirty radiator core or grille screens can restrict airflow, so remove any trash. Finally, a corroded coolant flow route can cause overheating, so flush the cooling system.
What to do if my Kubota ZD1211-AU Lawn Mower engine stops suddenly?
If your Kubota Lawn Mower engine stops suddenly, it might be due to insufficient fuel. Check the fuel valve position, refuel the mower, and bleed the fuel system if necessary.
Why is my Kubota ZD1211-AU Lawn Mower cutting unevenly?
An uneven cut with your Kubota Lawn Mower can be caused by several factors: * The mower deck is not level: Level the mower deck. * Ground speed is too fast: Slow down. * Blades are dull: Have the blades sharpened. * Blades are worn or damaged: Replace the blades. * Low tire inflation: Add air to correct pressure. * Anti-scalp rollers are not adjusted correctly: Adjust the anti-scalp rollers. * Wheels pressure not adjusted correctly: Set both tire pressures to the correct pressure.
Why is the discharge deflector plugged on my Kubota ZD1211-AU?
If the discharge deflector on your Kubota Lawn Mower is plugged, it could be due to several factors: * The grass is too wet: Wait for the grass to dry. * The grass is too long: Raise the cutting height and cut the grass twice. * Cutting too low: Raise the cutting height. * Engine RPM too low: Mow at full throttle. * Ground speed too fast: Slow down.
Why is my Kubota ZD1211-AU streaking grass uncut?
If you notice streaking of uncut grass with your Kubota Lawn Mower, consider the following: * Ground speed is too fast: Slow down. * Engine RPM is too low: Mow at full throttle, check, and reset the engine RPM. * Grass is too long: Cut the grass twice. * Blades are dull or damaged: Replace or sharpen the blades. * Debris is in the mower deck: Clean the mower deck.
Why does the battery electrolyte level drop rapidly in my Kubota ZD1211-AU?
If the battery electrolyte level in your Kubota Lawn Mower drops rapidly, it could be due to a crack or pin holes in the electrolytic cells, requiring you to replace the battery. It might also indicate a charging system trouble.
Why is recharging my Kubota ZD1211-AU impossible?
If recharging your Kubota Lawn Mower battery is impossible, it is probably because the battery life has expired. Replace the battery.
Instructions and checks to perform before starting machine operation.
Safety precautions for the Roll-Over Protective Structure (ROPS).
Safety measures to prevent accidents involving children during operation.
Precautions and techniques for safely operating the machine on slopes.
Procedures for safely stopping the machine and disengaging controls.
Guidelines and safety for operating the Power Take-Off (PTO) system.
Guidelines for safely transporting the machine via trailer or truck.
Information about the KUBOTA Limited Express Warranty and its conditions.
Procedures for safely decommissioning and disposing of the machine.
Detailed technical specifications for various Kubota mower models.
Identification and location of all instrument panel components and controls.
Diagram and identification of components for RCK60P and RCK72P mower decks.
Diagram and identification of components for RCK60R and RCK72R mower decks.
Step-by-step instructions for attaching the mower deck to the machine.
Procedures for installing specific parts onto the mower deck.
Safety procedures for mounting and dismounting the machine.
Comprehensive guide to safely starting the engine.
Overview of the LCD monitor display and its functions.
Procedures for starting the engine in cold weather conditions.
Instructions for warming up the engine, especially in cold temperatures.
Guidelines for operating a new machine to ensure longevity and performance.
Instructions for operating the foldable Roll-Over Protective Structure (ROPS).
Detailed steps for starting the machine's engine and preparing for operation.
Operation of the hydraulic lift control pedal for raising/lowering implements.
Understanding and using the motion control levers for movement and steering.
Special procedures for restarting the machine on a slope.
Advice and best practices for effective mowing.
Instructions for adjusting the mower deck's cutting height.
Methods to prevent grass clippings and dust from scattering.
General information and safety regarding tires.
Important notes regarding wheel installation and torque.
How to open the hood, front cover, and step for access.
Instructions for adjusting the operator's seat position.
Procedures for safely tilting the machine for maintenance.
Checklist of daily inspections to perform before operating the machine.
Information on lubricants, fuel, and coolant types and capacities.
Table outlining maintenance tasks and their recommended intervals.
Maintenance tasks to be performed every 50 operating hours.
Maintenance tasks to be performed every 100 operating hours.
Maintenance tasks to be performed every 200 operating hours.
Maintenance tasks to be performed every 400 operating hours.
Maintenance tasks performed every 1000 hours or annually.
Maintenance tasks performed every 2000 hours or two years.
Maintenance tasks to be performed annually.
Maintenance tasks to be performed every 4 years.
How to replace blown fuses in the machine's electrical system.
How to check, sharpen, and replace mower blades.
Procedure for replacing the mower drive belt.
Adjustments for the motion control levers to ensure proper operation.
Procedures for leveling the mower deck.
How to level the mower deck from side to side.
How to level the mower deck from front to rear.
Procedures for storing the machine for extended periods.
Steps to take when taking the machine out of storage.
Table of engine problems, causes, and recommended remedies.
Troubleshooting common power train issues and error codes.
Common battery problems, their causes, remedies, and preventive measures.
Troubleshooting for general machine operational issues.
Common problems related to the mower deck and their solutions.
General| Engine Type | Diesel |
|---|---|
| Engine Model | Kubota D1105 |
| Engine Power | 24.8 HP |
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Deck Type | Fabricated |
| Cutting Height Range | 25-127 mm (1-5 in) |
| Speed Range | 0-8.5 mph |
| Type | Zero-Turn Mower |
| Cutting Width | 60 inches (152 cm) |
To Next Page
