EasyManua.ls Logo

KUHN FC303YGC - User Manual

KUHN FC303YGC
80 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
KN055EGB F
OPERATOR'S MANUAL
Mower conditioner
FC303YGC
KN055EGB F
- English - 11-2009

Table of Contents

Questions and Answers

  • C
    christinamcdowellAug 3, 2025
    Why is my KUHN FC303YGC leaving uneven stubble?
    • E
      Erin HerringAug 3, 2025
      Uneven stubble can occur for several reasons. It may be due to dull or broken knives, which require replacement. Ensure knives are installed correctly, with the arrow on the knife upper face pointing in the disc's direction of rotation. Excessive ground speed or incorrect cutting height can also cause this issue, so reduce ground speed and adjust the cutting height accordingly. Also, check for incorrect mowing unit floatation and adjust the mowing unit ground pressure. If you are dealing with tangled and down crops, reduce the cutting height and adjust the mowing unit ground pressure.
  • J
    Justin HullAug 9, 2025
    What to do if KUHN FC303YGC has badly shaped windrows?
    • W
      William Myers MDAug 10, 2025
      Badly shaped windrows may result from several factors: belts may be slipping (check and replace the rotor drive belts, if necessary), the PTO speed may be too low (increase speed to 1000 min-1), or the swath shields may be incorrectly adjusted (adjust both swath shields).
  • M
    Marissa CarterAug 16, 2025
    Why does KUHN Farm Equipment require too much pull power?
    • K
      Kevin DavisAug 16, 2025
      If your machine requires too much pull power, it may be due to too much cutterbar down pressure. Adjust the mowing unit ground pressure to resolve this issue.
  • A
    Andrew YoungAug 21, 2025
    What to do if there is soil build up in front of the cutterbar on KUHN FC303YGC Farm Equipment?
    • G
      gibsonalbertAug 21, 2025
      Soil build up in front of the cutterbar can be caused by too much cutterbar down pressure or very wet working conditions. To address this, adjust the mowing unit ground pressure. If conditions are very wet, also adjust the cutting height.
  • M
    mvillanuevaAug 27, 2025
    How to fix obstruction of conditioning rotor in KUHN FC303YGC?
    • D
      Deborah WilliamsAug 27, 2025
      An obstruction of the conditioning rotor can be caused by insufficient rotor speed, too much cutterbar down pressure, or swath shields being too closed. Check the rotor drive belts and replace them if necessary. Adjust the mowing unit ground pressure. Open the swath shields.

Summary

Safety

Description of Symbols Used in this Document

Explains the meaning of symbols used throughout the manual for hazard communication.

Safety Instructions and Precautions

General safety guidelines, operational, maintenance, and driving precautions.

Safety Decals

Road Safety Equipment and Recommendations

Putting into service

Coupling and Uncoupling Procedures

Step-by-step instructions for attaching and detaching the machine from the tractor.

Instructions for transport

Preparing the Machine for Transport

Steps to safely transition the mower conditioner into its transport configuration.

Road Compliance for Transport

Instructions for work

Putting the Machine into Work Position

Adjustments in Working Position

Procedures for adjusting cutting height, suspension, and rotor speed for optimal performance.

Machine Use and Groundspeed

Guidelines for operating the mower conditioner and adapting forward speed to conditions.

Maintenance and storage

Lubrication Frequency and Procedures

Schedule for lubrication intervals and detailed steps for greasing components.

Draining and Refilling Gearboxes and Cutterbar

Inspection and Replacement of Knives and Fixings

Storage and Seasonal Preparation

Trouble shooting guide

Troubleshooting Uneven Stubble

Troubleshooting Soil Build-up and Rotor Obstruction

Troubleshooting Windrows and Power Requirements

KUHN FC303YGC Specifications

General IconGeneral
BrandKUHN
ModelFC303YGC
CategoryFarm Equipment
LanguageEnglish

Related product manuals