KUHN FC813R - Page 5

2. - Contents
FC813R
3
KN013CGB K
Mower conditioner
5. Machine specifications................................................................................................ 31
5.1 Description and glossary ............................................................................................................... 31
5.2 Technical specifications ................................................................................................................. 34
5.3 Sound levels .................................................................................................................................. 34
6. Putting into service...................................................................................................... 35
6.1 Description of control elements ..................................................................................................... 35
6.1.1 Positioning and parking....................................................................................................36
6.1.2 Description of the controls................................................................................................37
6.1.3 Putting the machine from headland turn into transport position and vice versa............... 38
6.1.4 Control box protection ...................................................................................................... 40
6.1.5 Description of the connection........................................................................................... 41
6.2 Coupling and uncoupling............................................................................................................... 42
6.2.1 Description of coupling elements ..................................................................................... 42
6.2.2 Preparing the tractor......................................................................................................... 43
6.2.3 Coupling the machine.......................................................................................................44
6.2.4 Hydraulic connections ......................................................................................................47
6.2.5 Electrical connections....................................................................................................... 49
6.2.6 Primary PTO shaft............................................................................................................ 50
6.2.7 Intermediate PTO shafts................................................................................................... 52
6.2.8 Adjusting the machine......................................................................................................55
6.2.9 Uncoupling the machine................................................................................................... 56
7. Instructions for transport............................................................................................ 58
7.1 Putting the machine into transport position ................................................................................... 58
7.2 Conformity with the road regulations ............................................................................................. 63
8. Instructions for work ................................................................................................... 64
8.1 Putting the machine into work position .......................................................................................... 64
8.2 Putting the machine in headland turn position............................................................................... 68
8.3 Adjustments in working position .................................................................................................... 69
8.3.1 Cutting height ................................................................................................................... 69
8.3.2 Ground pressure .............................................................................................................. 70
8.3.3 Conditioning intensity ....................................................................................................... 74
8.3.4 Swathing system .............................................................................................................. 75
8.4 Machine use .................................................................................................................................. 76
8.4.1 Lateral offset..................................................................................................................... 78
8.4.2 Drive speed ...................................................................................................................... 80