10. - Maintenance and storage
FC813R
95
KN013CGB K
Mower conditioner
10.4 Maintenance
10.4.1 Hydro-pneumatic accumulators
Before leaving the tractor or before
adjusting, maintaining or repairing the
machine, disengage the PTO drive, turn off
the engine, remove ignition key and wait until
all moving parts have come to a complete
stop and apply park brake.
Before any work is carried out on a hydraulic
circuit with hydro-pneumatic accumulator,
depressurize the circuit.
It is strictly forbidden to weld, grind or drill
onto a hydro-pneumatic accumulator.
Hydro-pneumatic accumulators do not require any
particular maintenance.
- Regularly check the tightness of the accumulator
fixing bolts and that no oil has leaked from
hydraulic circuit (a small oil leak can change
settings) (1).
To Next Page
