What to do if soil builds up in front of the KUHN Lawn Mower cutterbar?
If soil builds up in front of the cutterbar of your KUHN Lawn Mower, it could be due to too much cutterbar down pressure. Try adjusting the compensating spring tension. Also, if working conditions are very wet, adjust the main frame height with regards to the ground and consider fitting raised skid shoes.
Why is the KUHN Lawn Mower leaving uneven stubble?
If the stubble is uneven when using your KUHN Lawn Mower, several factors could be at play. The knives might be dull or broken, requiring replacement. Ensure the knives are correctly installed, with the arrow on the upper face pointing in the disc's direction of rotation. Insufficient disk speed may be the problem, so check the belt tension. Also, verify that the PTO speed is at 540 min-1. Lastly, the cutter bar pitch angle might be too high, so reduce it.
What to do if the KUHN Lawn Mower safety breakback releases too often?
If your KUHN Lawn Mower's safety breakback releases too frequently, the spring washer compression might not be sufficient. Increase the spring washer compression to resolve this issue.
How to fix stubble that is too long with the KUHN Lawn Mower?
If the stubble is too long when using the KUHN Lawn Mower, it could be due to an incorrect cutter bar pitch angle. Modify the pitch angle using the top link to correct this. It may also be that the machine is too light. In this case, adjust the compensating spring tension and check the frame position.
Why does my KUHN Lawn Mower have bad ground contour adaptation?
If your KUHN Lawn Mower has bad ground contour adaptation, the main frame setting might be incorrect; adjust the main frame height with regards to the ground. Excessive ground speed can also cause this, so reduce your speed. Another potential issue is a blocked hydraulic cylinder; set the hydraulic valve in the floating position. Incorrect compensating spring adjustment may also be the reason, so adjust the compensating spring tension. Finally, check the condition of the cutter bar pivot bushes and replace if necessary, as they may be worn or seized.
How to stop interference between tractor and front guard on KUHN Lawn Mower?
If there is interference between the tractor and the front guard of your KUHN Lawn Mower, the cam adjustment may be incorrect. Adjust the machine pivot moment to resolve this.
What to do if KUHN Lawn Mower mowing unit positioning is incorrect?
If the mowing unit is incorrectly positioned with regards to the tractor when placed in working position on your KUHN Lawn Mower, ensure that you are using the tractor's double acting valve position to lower the mowing unit.
General| Brand | KUHN |
|---|---|
| Model | GMD600GII |
| Category | Lawn Mower |
| Language | English |
Statement on the company's commitment to product improvements and the right to make changes.
Defines the specific purpose for which the mower is manufactured, primarily for fodder harvesting.
Illustrates the front perspective of the disc mower.
Illustrates the rear perspective of the disc mower.
Details for recording machine type and serial number for spare parts orders.
Lists available optional equipment kits for the machine, requiring ticking.
Explains the meaning of various symbols used throughout the manual for safety and information.
General safety instructions for operation, maintenance, and repair by competent persons.
Guidelines for pre-operation checks, including clothing, guards, and tool tightness.
Advice on tractor handling, stability, and speed adaptation to ground conditions.
Considerations for dimensions, weight, and lighting when operating on public roads.
Recommendation to adhere to legal speed limits for tractor-machine assemblies.
Safety measures to ensure the machine is secured before and during attachment.
Safety warnings and precautions related to the high-pressure hydraulic system.
Safety guidelines for the proper use and maintenance of the PTO shaft.
Safety advice when moving the machine between working and transport positions.
Warning about crushing and shearing hazards from hydraulically or pneumatically operated parts.
Importance of safety decals for warning of dangers and proper maintenance.
Guidelines for environmentally responsible disposal of machine fluids and parts.
Safety measures before and during maintenance or repair activities.
Safety advice regarding the projection of objects during mowing operations.
General safety measures to follow during the operation of the disc mower.
Diagrams showing the placement and explanation of various safety decals on the machine.
Details on required road safety equipment and speed recommendations for transport.
Provides a labeled diagram of the machine components and a glossary of terms.
Lists key technical data including dimensions, weight, and power requirements.
Details the measured sound levels of the tractor and tractor-machine assembly.
Identifies key control elements such as the release cord and adjustment wrench.
Explains the procedure for attaching and detaching the machine to a tractor.
Checks and adjustments required for the tractor before coupling the mower.
Instructions for adjusting tractor lift rods to ensure hitch pins are parallel to the ground.
Procedure for balancing play and locking lower link stabilizers.
Steps for preparing the mower for coupling, including positioning lower links.
Instructions for adjusting linkage dimensions and hitch pin positions.
Detailed steps for connecting the tractor's linkage and PTO to the mower.
Procedures for adjusting the machine's frame height and check chains for optimal operation.
Steps for safely detaching the mower from the tractor.
Guide on how to safely transition the mower from working to transport configuration.
Ensures compliance with road traffic laws, including signalling and reflectors.
Procedure for deploying the mower from transport to its operational working position.
Details on making adjustments while the mower is in its working configuration.
Instructions on how to set and adjust the desired cutting height.
Information on the swathing system and adjustments for swath width.
Guidance on adjusting the compensating spring for optimal ground contour adaptation.
Essential safety and operational practices for using the mower effectively.
Advice on adapting the forward speed of the tractor to working conditions.
Procedure for executing headland turns using the mower's pivot function.
Safety procedures to follow when the machine encounters an obstacle or for break-away latch reset.
Details on raised skid shoes for higher mowing and use on sticky grounds.
Information about the inner swath disc and its effect on swath width.
Describes the inner swath shield for reducing swath width, used with the inner swath disc.
Explains the function of side deflectors for mowing dense or down crops with long stems.
Details side deflectors with high cone discs to prevent crop wrapping in dense conditions.
Describes the installation of lighting and signalling systems for road compliance.
Procedure for connecting the machine's electrical plug to the tractor's socket.
Steps for positioning rear signalling devices for transport.
Steps for disconnecting signalling devices for work.
Details on lateral signalling equipment for road compliance, installed on each side.
Information on the quick hitch connector, primarily for North America.
Details on longer hitch pins for offsetting the machine and linkage adjustment.
Provides a schedule of maintenance tasks and their intervals based on usage hours.
Guidance on lubricating moving parts and joints using specific grease.
Specific lubrication intervals for the primary PTO shaft components.
Procedure for draining and refilling the cutterbar with specified gear oil.
Instructions for draining and refilling the angle gearbox with specified oil.
General maintenance procedures including belt tension and breather plug checks.
How to check and adjust belt tension, and when to replace belts.
Procedure for checking and topping up the cutterbar oil level.
Guidelines for inspecting and replacing knives and their securing components.
Checks and replacement criteria for bolts, nuts, and washers used in fixing elements.
Detailed steps for replacing knives, including safety and torque specifications.
Procedure for removing and reinstalling mower discs, including torque settings.
Instructions for preparing and storing the machine at the end and start of seasons.
Lists exclusions and limitations to the limited warranty coverage.
Details the mandatory conditions for warranty claims to be valid.
To Next Page
