KUHN GMD802 - Transport stabilizing pressure

Disc mower
42
GMD802
Instructions for work
 Transport stabilizing pressure
The mowing unit cushioning is obtained with an
hydro-pneumatic accumulator. In modifying the
accumulator's pressure, the mowing unit's cushioning
varies.
To check the mowing unit's stabilizing
pressure
Place the machine in transport position.
Check the pressure given on the gauge:
- NORMAL operating pressure = 160 bar (2285 psi).
- MINIMUM operating pressure = 160 bar (2285 psi).
- MAXIMUM operating pressure = 170 bar (2428 psi).
Never adjust machine to a pressure not
comprized between these limit values.