Need help?Do you have a question about the KUNTENG KT-LCD3 and is the answer not in the manual?
General| Brand | KUNTENG |
|---|---|
| Model | KT-LCD3 |
| Category | Bicycle Accessories |
| Language | English |
Instructions for powering the meter on and off using the SW button.
Procedure to set the maximum riding speed limit.
Configures units for speed, distance, and temperature (Km/H, Km, °C vs. MPH, Mil, °F).
Procedure to select the correct wheel diameter specification.
Setting the motor characteristic parameter (gear ratio x magnet pieces).
Configures the wheel speed pulse signal count per revolution.
Configures handlebar startup mode (zero or non-zero startup).
Sets the power assist control mode (imitation torque or speed control).
Sets power monitoring mode (real-time voltage or smart power).
Selects power assist sensor type and parameters (e.g., Forward 5 Signal).
Sets motor phase classification coding for sine wave drive motors.
Initializes power assist ratio gears or sets auto-restore behavior.
Configures handlebar functions like speed limits and gear display.
Adjusts the controller's maximum operating current limit.
To Next Page
