KUNTENG KT-LCD7 User Manual

KT-LCD7 e-Bike Display User Manual V1.0
Dear customer, please read this manual before you use KT-LCD7 instrument. The manual will guide
you use the instrument correctly to achieve a variety of vehicle control and vehicle status displays.
Functions and Display
1
UP button
12
KM/H
Riding speed(metric)
2
SW button
MPH
Riding speed (imperial)
3
DOWN button
MXS
MAX speed
4
ASSIST
Pas level
AVS
Average speed
5
Battery capacity indicator
13
KM
Distance(metric)
6
Backlight and headlights
Mil
Distance (imperial)
7
CRUISE
Cruise function
DST
Trip distance
8
PAS
Power-assisted function
ODO
Total distance
9
TM
Single trip time
VOL
Battery voltage
TTM
Total trip time
14
The brake display
10
THROTTLE
Throttle display
15
Bluetooth display
11
6KM/H push power assist
Operation
1. ON/OFF
Hold button long to turn on the power, and hold button long for a second time to turn
off the power. When the motor stops driving and when the e-bike is not used for a consecutive 5
minutes, it will automatically shut down and turn off the motor power supply.
2. Display 1
Hold button to start up and enter display 1.
2.1 Turn on backlight and headlights
Hold button long to turn on backlight and headlights (the controller
should have headlight drive output function); hold button long again to
turn off the backlight and headlights.
2.2 Assist ratio gear (ASSIST) switch
Hold or button shortly to switch 1-5 file gear. Gear 1 is for the
minimum power, gear 5 is for the highest power. Each startup will
automatically restore the gear shutdown last time (the user can set randomly).
Gear 0 is without booster function.
2.3 6KM/H assist promotion function
Hold button and flashes, the vehicle drives at the speed not
more than 6KM /H. Release button, the function is invalid.
2.4 THROTTLE display
Turn on throttle, THROTTLE display.
2.5 PAS display
When Power-assisted riding, PAS display.
2.6 Cruise function
After the cruise function is turned on, the trip riding speed is greater
than 7 KM/ H, hold button long and enter cruise, the CRUISE lit. Brake
or hold any button to cancel.
2.7 Bluetooth connection display
When the mobile phone is connected with the Bluetooth module, the
Bluetooth connection signal is on, display.

KUNTENG KT-LCD7 Specifications

General

Brand	KUNTENG
Model	KT-LCD7
Category	Bicycle Accessories
Language	English

Summary

Display Functions and Operation

Backlight and Headlight Control

Turn on/off the backlight and headlights.

Assist Gear Switching

Switch between assist levels 1-5.

6KM/H Assist Promotion

Activate 6KM/H walk assist function.

Throttle and PAS Display

Display throttle and Power-assisted function activity.

Cruise Control Function

Engage and cancel the cruise control feature.

Bluetooth Connectivity Status

Indicate Bluetooth connection status.

Power On/Off and Auto Shutdown

Turn the display on/off and automatic shutdown.

Display Mode Navigation

Navigate through different display modes.

Data Display and Settings

Single Data Deletion

Clear single trip time and distance data.

Display Modes 2 and 3

Navigate and understand Display 2 and Display 3.

Error Code Display

Interpret system error codes.

Wheel Diameter Setting

Configure wheel diameter specifications.

Metric/Imperial Unit Setting

Set speed and mileage units.

Maximum Riding Speed Setting

Set the maximum allowable riding speed.

Instrument Outline and Wiring

Main Instrument Dimensions

Physical dimensions of the instrument body.

Wiring Diagram

Connectors and wire colors for the display.