Basic Effects Mode
Controlling Effects
9-11
Figure 9-3 KDFX Software organization
Controlling Effects with a Sequencer
A useful technique for sequencer users is to set up the program controlling the studio
parameters to be a dummy program with no keymaps but with all of the FX Mods you need in
placeÑthis program produces no sound by itself, and exists only to control the studio. That way
you can use a dedicated MIDI channel for studio control. See page 15-29 and page 12-21 for
more information.
Controlling Effects with SysEx messages
You can also control KDFX by sending MIDI system-exclusive (SysEx) messages to the K2600.
See Appendix B in the MusicianÕs Reference for speciÞc information.
Input mixer
algorithm # (in ROM)
parameters
Studio #
FX Preset # Output mixer
Program or
Setup #
KDFX and
FXMod pages
real-time
control
To Next Page
Loading...