Program Mode
3-3
changes were made, the Program Save Dialog is executed first (see below). Otherwise the
display will immediately change back to Program Mode Base Page and the Program Mode
LED will stop flashing.
The first Program Mode Edit Page is for selecting the Effect Type (program).
There are 30 Effect Types, each with a unique combination of an ʺA Effectʺand a ʺB Effectʺ.
The number and name of the currently selected Effect Type are displayed on the bottom line
of the LCD. The + and - buttons or Data Slider may be used to scroll through the list of
choices.
The second Program Mode Edit Page is for adjusting the wet/dry mix for the A and B effects
separately. The arrow “>” indicates which parameter you are adjusting. You can move the
arrow to the A or B parameter by using the up and down menu buttons. The +/- buttons or
Data Slider are used to adjust the level which is pointed by the arrow.
Restoring the Default Effects Parameters
For either of these edit screens, pressing + and – at the same time will bring up this page:
Pressing the left soft button (ʺYe s ʺ) will cause the original factory settings for Effect Type and
Effect Levels for the current program to be reloaded. Pressing the right soft button
(ʺCancelʺ) brings back the previous display.
Saving Your Edited Program
To leave Program Mode Edit, press the Program Mode button (which is still flashing). If the
Effect Type or FX levels were changed from their previous values (including reloading the
defaults), the Program Save Dialog is executed first as shown below. If no changes have
been made, the dialog is skipped, the Program Mode Base page is displayed and the Program
Mode LED stops flashing.
The right soft button (ʺCancelʺ) will cancel the exit and return the display to the previous edit
page. The center soft button (ʺNoʺ) will discard the changes to Effect Type and Effect levels
then return the display to the Program Mode Base page.
Save Current Prog?
Yes No Cancel
Reload default prog?
Yes Cancel
Edit Effect Levels
A: 5% ►B: 10%
Edit Effect Levels
►A: 5% B: 10%
Edit Effect Type
16 Hall:Chorus
To Next Page
Loading...
