MIDI Mode
5-3
Saving and Exiting
To escape MIDI Edit Mode and return to the MIDI base page, press the MIDI Mode button
again. If any parameter was changed while on the editing pages, the MIDI Save dialog will
begin with this screen:
At this point only the three soft buttons will be recognized as follows:
Cancel - Return to the previous edit page.
No - Exit MIDI Mode without saving the edited values.
Yes - Save the new MIDI parameter values.
After the save operation, a confirmation screen is displayed briefly then MIDI Edit Mode is
exited.
MIDI parameters
Saved.
Save Edited Value?
Yes No Cancel
To Next Page
Loading...
