Chapter 8
Reference
Default Program Setup
The Program Setup defines the MIDI characteristics of Program mode.
You also set the effects parameters for each of the 256 sounds while editing the Program.
Program Parameters
Below is a list of the parameters and default values for the Program Mode. The shaded
parameters are not available in Program mode.The default values of the effects parameters
vary according to which sound is selected.
ZONE 1 ZONE 2 ZONE
Sound Group and Program - According to sound selected None None
Key Range Low - C2 - -
Key Range High - C6 - -
Vel. Range Low - 1 - -
Vel. Range High - 127 - -
Note Shift - Initially 0 then as edited - -
Volume - 127
FXA Level - According to sound selected then as edited - -
FXB Level - According to sound selected then as edited - -
MIDI Channel - Initially 1 then as edited None None
MIDI Program - According to sound selected None None
MIDI Bank - According to sound selected None None
Zone Mutes - On Off Off
FX Type - According to sound selected
Program List
Below is a list of the 256 sounds (Programs) available from the internal sound module. The
list includes the control assignment and the factory default effects setting for each sound.
To Next Page
Loading...
