Chapter 7 Function Mode
Use the [Next] and [Previous] buttons to adjust the value of the chosen function.
Function mode settings are only maintained while the power is on.
When the instrument is turned off, all Function mode settings revert
to their factory default.
1. Using Function Mode
To access Function Mode, press the [Auto Layer] and [Split] buttons at
the same time.
“F01” will be shown on the display and both LEDs will blink.
Use the [Auto Layer] and [Split] buttons to select the function to be adjusted.
Edu
Voices Piano
Volume
Split
Next
Previous
Metro/Rhy
Auto Layer
GM
Duo
To Next Page
Loading...
