Kurzweil PC1 - MUSICIANS GUIDE REV B - Parameter Reference

General Reference
Parameter Reference
B-3
Parameter Reference
ParameterGroup
Subgroup
(if any)
Parameter Range of Values Default
MIDI Channel Off, 1–16 Zones 1–4
default to
channels 1–4
Dest Local, MIDI, Local+MIDI Local+MIDI
Bnd Rng (semitones) 0–127 2
Bnd Rng (cents) 0–127 0
AuxBend1 Up 0—60 semitones 12
MIDI Xmit(transmit)
AuxBend1 Down 0—60 semitones 12
Bank 0–13,683 Programs
Program 0–127
Entry Transmit Off, On On
Bank Mode None, Ctl 0, Ctl 32, Ctl 0/32, K2000,
K1000
Ctl 0/32
PNumDisp 0–127, 1–128, 11–88, A1–P8 0–127
Program
PNameDisp Off, Internal, Gen MIDI Internal
Lo C-1–G 9 D 0
Hi C-1–G 9 G 9
Note Map Off, Linear, 1 of 2, 2 of 2, 1 of 3, 2 of
3, 3 of 3, 1 of 4, 2 of 4, 3 of 4, 4 of 4,
Invrs, Const
Linear
Key Range
AutoSplit Off, On On
Transposition
Transpose -127 to 127
0
Vel Scale -300 to 300% 100%
Vel Offset -127 to 127 0
Vel Curve Linear,
Sin+, Cos+
Linear
Vel Min 1–127 1
Velocity
Vel Max 1–127 127
Continuous
controllers
Wheel 1
Up Ctrl Num
Entry Value
Any control source or destination
(Next column for defaults)
None, 0–127 (default None)
Wheel 1 Up
Ctrl Num: Pitch
Up
Wheel 1
Down
Wheel 1 Down
Ctrl Num: Pitch
Down
Wheel 2 Wheel 2 Ctrl
Num: Mod Whl
MPressure MPressure Ctrl
Num: Pressure
Knob A
Knob B
Knob C
Knob D
These controllers all
have the same three
parameters, called
the Basic Parameter
Group.
Default values are
usually the same,
with the exception of
Ctrl Num; its value
varies for each
controller
Pedal 1
Exit Value None, 0–127 (default None)