4
-
18
Troubleshooting & Maintenance
Converting the Voltage
Converting the Voltage
Accessing the Fuses
1. Turn the power off and remove the power cord.
2. The fuse holder is located on the rear panel and is part of the power entry module.
3. The outer cover for the power switch and the fuse holder is a hinged door.
4. Insert, at an angle, a thin flat tool into the red voltage indicator window.
5. Gently pull up the fuse holder cover.
6. Position the flat tool as shown in the photo above and pry out the fuse holder.
To Next Page
Loading...
