MIDI Setups Mode
MIDI Controller Destinations
4-7
B Ribbon Up, B Ribbon Down
0-129 and Off
SpeciÞes where signals from the two halves of the right ribbon are sent for this zone.
Defaults are Modulation Wheel (1) and Pan (10) respectively. See MIDI Controller
Destinations for a description of MIDI destination numbers. Some internal sounds will
respond to Modulation but none will respond to Pan.
Hold or Zero
Hld, Zro
SpeciÞes whether the B ribbon signal remains at its last value or returns to zero when
your Þnger is lifted. Default is Hold.
Control Slider, Control Pedal
0-129 and Off
SpeciÞes where signals from the front panel Volume/Controller slider and control
pedal are sent for this zone. Defaults are Volume (7) and Foot Controller (4)
respectively. The internal sound module does not respond to Foot Controller signals.
Switch Pedal R, Switch Pedal L
0-129 and Off
SpeciÞes where signals from the two possible switch pedals go for this zone. Defaults
are Sustain Pedal (64) and Sostenuto Pedal (66). The standard single switch pedal
functions as Switch Pedal R.
MIDI Controller Destinations
As noted above, all of the performance controls have a Destination parameter. The Info
Strip on the front panel has a very brief summary of the 130 possible MIDI
destinations, which weÕll detail here.
ItÕs important to realize that the deÞnitions below are merely conventions and may be
different for some external modules, especially older ones. Your Stage piano, being
programmable, can adapt to match most any sound moduleÕs assignment by changing
the MIDI destination number for the control.
To Next Page
Loading...
