8-2
Reference
Factory Default Internal Voices Setup
Factory Default Internal Voices Setup
The Internal Voices Setup deÞnes the MIDI characteristics of Internal Voices mode.
You also set the effects parameters for each of the 32 sounds while editing the Internal
Voices Setup.
Internal Voices Parameters
Below is a list of the parameters and default values for the Internal Voices setup. The
shaded parameters are not available in Internal Voices mode.
The default values of the 3 effects parameters vary according to which sound is
selected.
Parameter
(Column 1)
Default
Value
Parameter
(Column 2)
Default
Value
Internal Sound Reverb Wet/Dry Varies
MIDI Program Off Chorus Wet/Dry Varies
MIDI Bank Sel Lo Off A Ribbon 128
MIDI Bank Sel Hi Off Hold or Center Ctr
MIDI Channel 1 B Ribbon Up 1
Destination Both Hold or Zero Zer
Internal Effect Varies
B Ribbon Down 10
Hold or Zero Zer
Key Range Lo Control Slider 7
Key Range Hi Control Pedal 4
Transpose 0 Switch Pedal R 64
Velocity Curve 1 Switch Pedal L 66
To Next Page
Loading...
