K-Series Transport
33
Unfolding the wheelchair
Pull the cord on the backrest of the wheelchair.
Pull the backrest backwards using the backrest brace,
until the backrest tube engages on both sides of the
frame.
Fold the clothes-guard back into position on both sides.
IMPORTANT!
When unfolding the wheelchair, do not pull the
backrest brace without previously releasing the
backrest using the cord.
IMPORTANT!
Check that the backrest is completely engaged on
the frame, before you use the wheelchair again.
7.3 Removing and fitting the rear wheels
WARNING! Risk of overturning
If the removable axle of a rear wheel is not fully
engaged, the wheel can become loose during use.
This can lead to overturning.
- Always ensure that the removable axles are fully
engaged whenever you fit a wheel.
Removing the rear wheels
Release the brakes.
With one hand, hold the wheelchair upright.
With the other, hold the wheel through the external spoke
rim around the wheel hub.
Using your thumb, press the removable axle button .
Keep it pressed and pull the wheel out of the adapter
sleeve .
To Next Page
Loading...
Need help?
General
