Need help?Do you have a question about the Kwikset SmartCode 9270CNT-514S and is the answer not in the manual?
General| Type | Electronic Deadbolt |
|---|---|
| Product Type | Smart Lock |
| Keypad | Yes |
| Smart Home Compatibility | Z-Wave |
| Finish | Satin Nickel |
| Battery Type | 4 AA batteries |
| Power Source | Battery |
| Number of User Codes | Up to 30 |
| Auto-Lock | Yes |
| Certification | ANSI/BHMA Grade 2 |
| Lock Type | Deadbolt |
| Backset | Adjustable 2-3/8" or 2-3/4" |
| Keyway | KW1 |
| Programmable Codes | Yes |
| One-Touch Locking | Yes |
| SmartKey Security | Yes |
| Battery Life | Up to 1 year |
| Security Features | SmartKey Security |
Components for the exterior side of the lock.
Components for the interior side of the lock.
Protective cover for the interior lock components.
The bolt mechanism that secures the door.
Accessory for latch installation.
Metal plate for the door frame.
Plate used to attach the interior assembly.
Physical keys for manual operation.
Tool for re-keying the SmartKey cylinder.
Essential tool for assembly and installation.
Warning against using power drills during installation.
Steps to uninstall current lock hardware from the door.
Guide for fitting the lock's latch mechanism.
Instructions for mounting the strike plate on the door jamb.
Mounting the keypad and exterior components.
Connecting and attaching the interior lock parts.
Inserting batteries into the lock unit.
Setting up a user code and securing the interior.
Procedures for locking and unlocking the door.
Labeled parts of the exterior lock interface.
Labeled parts of the interior lock interface.
Instructions for re-keying the lock to match an existing key.
Note on removing batteries when Auto-Lock is enabled.
Explains light and sound indicators for unlock operations.
Explains light and sound indicators for lock operations.
Explains indicators for factory reset success or failure.
Explains indicators for programming success or failure.
Steps to add a new user access code.
Steps to remove specific user access codes.
Steps to set or modify the programming code.
Procedure to remove all programmed user codes.
Controls for enabling or disabling audible feedback.
Options to enable or disable user codes.
Steps to add a single-use access code.
Setting the delay for automatic door locking.
Activating or deactivating the auto-lock feature.
Process for the lock to learn door orientation.
Restores the lock to its original factory settings.
Key safety precautions for using the lock.
Advice on lock security and environmental awareness.
Guidelines on battery replacement and disposal.
Statement of compliance with Federal Communications Commission rules.
Statement of compliance with Industry Canada regulations.
To Next Page