ENGINE OIL (MXU 300/250)
1.Engine oil level measurement
A. Place the machine on a level place.
B. Warm up the engine for several minutes
and stop it.
C. Check the oil level through the inspection
window (1).
D. The oil level should be between the
maximum (H) and minimum (L) marks. If
the level is low, add oil to raise it to the
proper level.
Wait a few minutes until the oil level settles
before checking.
NOTE:
(1) Engine oil inspection window
(
(3) Minimum level mark (L)
2) Maximum level mark (H)
H
L
(1)
(2)
(3)
126
To Next Page
Loading...
