2-1. Engine oil replacement and oil filter
cleaning
A. Place the machine on a level place.
B. Warm up the engine for several minutes
and stop it.
C. Place a container under the engine.
D. Remove the oil fill cap (1) and oil filter cap
(2) to drain the oil.
Be sure no foreign material enters the
crankcase.
CAUTION:
When removing the oil filter cap, the
compression spring, oil strainer and O-ring
will fall out. Take care not to lose these
parts.
CAUTION:
(1) Oil fill cap
(2) Oil filter cap
(1)
(2)
127
To Next Page
Loading...
