Stater button
To starter the engine, press the starter button,
with the transmission in neutral, the ignition
switch ON and the engine stop switch at RUN (
)
32
(2)
(2) Starter button (MXU 300/250)
See starting instructions prior to starting
engine (see page 66 for details).
CAUTION:
If the starter switch is pushed with the ignition
switch "ON" and the engine stop switch " ",
the starter motor will be activated but the
engine will not start. To start the engine, be
sure to position the engine stop switch at " ".
NOTE:
(2)
(2) Starter button (MXU 150)
To Next Page
Loading...
