Engine stop switch
When the switch is in the RUN ( ) position, the
engine will operate. When the switch is in OFF
( ) position, the engine will not operate.
This switch is intended primarily as a safety or
emergency control, and it should normally
remain in the RUN ( ) position.
If you stop your ATV by turning the engine stop
switch OFF ( ), be sure to turn the ignition
switch OFF to prevent battery discharge.
NOTE:
(3)
(3)Engine stop switch (MXU 300/250)
33
(3)
(3)Engine stop switch (MXU 150)
To Next Page
Loading...
