EasyManua.ls Logo

KYMCO MXU 150 - Page 79

KYMCO MXU 150
214 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If the engine fails to start, release the start
switch, then push the start switch again. Each
cranking should be as short as possible to
preserve battery energy. Do not crank the
engine more than 10 seconds on each attempt.
7. If the engine is started with the starter
(choke) in position , the starter (choke)
should be returned to position to warm up
the engine. If the engine is started with the
starter (choke) in position , keep the starter
(choke) in this position to warm up the
engine.
8. Continue warming up the engine until it idles
smoothly and return the starter (choke) to
position before riding.
NOTE:
Using the recoil starter (MXU 300/250)
The recoil starter is used to start the engine
when the battery is low.
(1) Recoil starter
(1)
68

Table of Contents

Other manuals for KYMCO MXU 150

Related product manuals