To start the engine without the electric starter
(MXU 300/250):
1. Follow steps 1 through 5.
2. With the throttle closed turning starter grip
counterclockwise to unlock and grasp the
starter grip firmly, then pull it out slowly until it
seats lightly.
3. Pull the grip up briskly and fully.
4. After the engine starts, allow the starter grip to
return slowly and turning it clockwise to lock.
5. Follow steps 7 through 8.
69
NOTE:
Do not allow water enter the V-belt
compartment, a .lways lock the recoil starter
Using the kick starter (MXU 150)
The kick starter is used to start the engine when
the battery is low.
(1)
(1) Start kick lever
To Next Page
Loading...
