Make sure that the lever is completely
shifted into position.
NOTE:
A. Bring the machine to a complete stop and
return the throttle lever to the closed
position.
B. Apply the parking brake.
C. Shift the gear from neutral to forward (in
high or low gear) by moving the shift lever
along the shift guide.
forward (MXU 300)
If the drive select lever is shifted into forward
or reverse while the engine is running, the
engine will stop unless the parking brake is
applied.
NOTE:
72
(1) Drive select lever
(R) For reverse drive
(N) Neutral
(H) For forward drive in high gear
(L) For forward drive in low gear
MXU 300
(1)
(R)
(N)
(L)
(H)
D. Open the throttle lever gradually.
Before shifting, you must stop the machine
and return the throttle lever to its closed
position until the engine speed to the
specified idling speed. Otherwise, the
transmission may be damaged.
CAUTION:
To Next Page
Loading...
