When in reverse, the reverse indicator light
should be on. If the light does not come on, ask
a KYMCO dealer to inspect the machine.
D. Check behind for people or obstacles, then
release the parking brake.
E. Open the throttle lever gradually and
continue to watch to the rear while backing.
POTENTIAL HAZARD
Improperly operation in reverse.
WHAT CAN HAPPEN
You could hit an obstacle or person behind
you, resulting in serious injury.
HOW TO AVOID THE HAZARD
When you shift into reverse, make sure
there are no obstacles or people behind
you. When it is safe to proceed, go slowly.
NOTE:
If the drive select lever is shifted into reverse
while the engine is running, the engine will
stop unless the parking brake is applied.
NOTE:
WARNING
A. Bring the machine to a complete stop and
return the throttle lever to the closed
position.
B. Apply the parking brake.
C. Shift the gear from neutral to reverse and
by moving the shift lever along the shift
guide.
2.Shifting: reverse
73
To Next Page
Loading...
