8-15
Troubleshooting > Troubleshooting
The previous image remains
and lightly printed.
― Make sure the paper type setting is
correct for the paper being used.
page 6-6
―
Select the [
Menu
] key > [
Adjust/Maintenance
]
> [
Service
] > [
MC
] > [
OK
] > [
OK
] and increase
the adjustment value. Increase the adjustment
value 1 level at a time from the current value. If
there is no improvement after the value is
increased by 1 level, increase by 1 level again.
If there is still no improvement, return the
setting to the original value.
―
Symptom Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
