Kyocera 1102RX3NL0 - Login;Logout; Login

2-13
Installing and Setting up the Machine > Login/Logout
Login/Logout
If you are setting a function that requires administrator rights, you must enter your administrator ID and administrator
password.
Login
1
Enter the administrator ID.
If the administrator login screen appears while you a using the machine, enter the
administrator ID and select the [OK] key.
2
Enter the administrator password.
Enter the administrator password and select [OK] key.
3
Select the [OK] key.
NOTE
The factory default administrator ID and administrator password are set as shown below.
Administrator ID: 4000
Administrator Password: 4000
NOTE
Enter an ID consisting of between 1 and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
NOTE
Enter a password consisting of between 0 (no settings) and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.