Need help?Do you have a question about the Kyocera KM-1815 and is the answer not in the manual?
Procedure to select the desired source for paper feed.
Procedure to select the size of the original for copying.
Selects the copy quality according to the type of originals.
Explains how to make adjustments to the exposure mode.
Explains how to make copies in an enlarged or reduced size.
Allows multiple originals to be scanned into memory for multiple copy sets.
Combines images from 2 or 4 originals onto a single copy.
Scans originals into memory in sections to form a single job.
Enables EcoPrint to reduce toner consumption for cost savings.
Assigns a file name for the copying job for administration.
Sends a scanned image as an attached file in an e-mail message.
Procedure to use the machine to scan documents and send via e-mail.
Selects the color mode for scanning (Full Color, Grayscale, Monochrome).
Sets the desired level of resolution for scanning.
Adjusts the exposure mode for scanning.
Defines the size of the image attached and received as e-mail.
Scans documents to an enlarged or reduced size.
Scans originals into memory in sections for a single job.
Selects the file format for the saved scanned image.
Assigns a name to the scanning job for identification.
Procedure to use the machine as a network printer.
Configures the parallel interface for bi-directional/high-speed mode.
Accomplishes network settings for network printing and e-mail.
Selects the emulation mode for printer compatibility.
Accesses the machine's web page for configuration and status.
Explains the meaning of icons displayed on the Status screen.
Verifies the status of both print jobs and scan jobs.
Verifies the history of both print jobs and scan jobs.
Temporarily pauses the processing of jobs.
Cancels print jobs and scan jobs that have not yet been processed.
Verifies the current status of printing operations.
Indicates the amount of remaining toner on a 10-level scale.
Prints out a report of the settings currently registered in the machine.
Adjusts the contrast of the message display to one of 7 levels.
Selects the language for the messages displayed on the machine.
Sets the default display mode after power-on (Copy, Scanner, Status).
Changes the unit of measurement for custom size settings.
Adjusts copy exposure for each original quality mode.
Resets the toner gauge after replacing the toner container.
Changes default settings for various functions for faster operation.
Registers destination e-mail addresses for one-touch keys.
Restarts the machine to properly register network settings.
Sets the current date and time for the machine.
Registers non-standard original sizes for copying or scanning.
Registers non-standard paper sizes for copying or printing.
Changes the default original size to a more frequently used one.
Selects paper source and sets paper size and type for cassettes/MP tray.
Lists the OS and web browsers required for using COMMAND CENTER.
Procedure to connect to COMMAND CENTER using a web browser.
Describes the operations performed on COMMAND CENTER page screens.
Verifies machine operating status and current settings via web interface.
Includes settings for device defaults, security, and basic networking.
Provides advanced settings, primarily for network configuration.
Provides guidelines and specifications for selecting paper for the machine.
Lists the technical specifications of the machine.
Shows possible combinations of copying and scanning functions.
Defines terms used throughout the manual.
To Next Page
General
