EasyManua.ls Logo

Kyocera KM-1510 - User Manual

Kyocera KM-1510
65 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION HANDBOOK
<Functions Edition>
Introduction
Chapter 1 Printer-related operation
■ 1. Printer Settings
■ 2. Memory Card / RAM Disk
Chapter 2 Software-related operation
■ 1. Procedure for Installing and Printing
with a Printer Driver
■ 2. Windows XL Driver
■ 3. Printer Driver for Windows 95/98
■ 4. Printer Driver for Windows NT
■ 5. Printer Driver for Windows 2000
■ 6. Printer Driver for Macintosh

Questions and Answers

  • J
    Jeffery BrownJul 29, 2025
    Why do my Kyocera Printer copies come out blank?
    • D
      Dana FitzpatrickJul 29, 2025
      If copies from your Kyocera printer are coming out blank, several factors could be at play. First, ensure that you've placed the originals correctly: face-down on the platen, or face-up (for 18 ppm copiers) or face-down (for 15 ppm copiers) in the document feeder. Also, check if the copier is in auto exposure mode and perform an auto exposure adjustment if needed. If using Photo, Text & Photo, or Text mode, adjust the exposure using the copy exposure adjustment keys or perform the exposure adjustment for each mode. Finally, if the Add Toner indicator is lit, replace the toner container.
  • T
    Tanya PruittAug 2, 2025
    How to clean my Kyocera Printer if copies are dirty?
    • S
      Stephanie LopezAug 3, 2025
      Dirty copies from your Kyocera printer can often be resolved by cleaning the platen and/or the document feeder (DF). Additionally, open the front cover and pull out, then push back in, the cleaning shaft.
  • B
    Bobby HarveyAug 6, 2025
    How to troubleshoot a Kyocera Printer when nothing lights up?
    • B
      Brett BushAug 7, 2025
      If nothing lights up on the operation panel of your Kyocera printer when you turn on the main switch, make sure the plug is securely connected to an AC outlet.
  • W
    Wendy GilmoreAug 11, 2025
    How to fix Kyocera Printer printing issues after installing a printer board?
    • J
      Jessica GilbertAug 11, 2025
      To resolve printing issues from a computer after installing the optional printer board in your Kyocera printer, ensure that the printer board is installed correctly.
  • M
    Mr. Jermaine Finley Jr.Aug 15, 2025
    How to fix Kyocera KM-1510 copies that are too dark?
    • C
      Charles CuevasAug 15, 2025
      If copies from your Kyocera printer are too dark, it might be due to the exposure settings. If the copier is in auto exposure mode, perform an auto exposure adjustment. Alternatively, if you're using Photo, Text & Photo, or Text mode, adjust the exposure to the correct degree using the copy exposure adjustment keys, or perform the exposure adjustment for each mode.
  • M
    Megan BrooksAug 19, 2025
    What to do if my Kyocera KM-1510 Printer misfeeds frequently?
    • J
      Jay HallSep 12, 2025
      Frequent misfeeds in your Kyocera printer could stem from several causes. Ensure the paper is correctly set in the drawer(s). Replace any curled, folded, or wrinkled paper with a fresh stack. Check inside the copier for any misfed paper or loose scraps and remove them. Lastly, verify that the set paper size matches the actual paper size you're using; if not, adjust the setting or use the correct size paper.
  • D
    Dr. Elizabeth KennedyAug 25, 2025
    Why is the copy image askew on my Kyocera Printer?
    • J
      Jennifer NguyenAug 25, 2025
      If the copy image from your Kyocera printer is askew, check the original's placement. When using the platen, align a corner of the original with the rear left corner. When using the document feeder (DF), for 18 ppm copiers, adjust the original insertion guides to the original size. For 15 ppm copiers, align the original to the rear of the DF. If issues persist with the DF, try making copies by placing originals on the platen.

Summary

Introduction

Chapter 1 Printer-related operation

1. Printer Settings

Detailed guide on configuring various printer settings via the control panel.

2. Memory Card; RAM Disk

Information on using memory cards and creating/managing RAM disks.

Chapter 2 Software-related operation

1. Procedure for Installing and Printing with a Printer Driver

Comprehensive steps for installing and performing printing tasks with printer drivers.

2. Windows XL Driver

Instructions for installing and configuring the Windows XL printer driver.

3. Printer Driver for Windows 95;98

Guide for installing and using printer drivers on Windows 95 and 98 operating systems.

4. Printer Driver for Windows NT

Explains the installation and operational procedures for Windows NT printer drivers.

5. Printer Driver for Windows2000

Details on how to install and utilize printer drivers for the Windows 2000 environment.

6. Printer Driver for Macintosh

Steps for installing and configuring printer drivers on Macintosh computers.

Kyocera KM-1510 Specifications

General IconGeneral
Resolution600 x 600 dpi
ConnectivityUSB 2.0
Paper Capacity250 sheets
TechnologyLaser
Maximum paper sizeA4
Paper weight60-163 g/m²
Internal memory8 MB
Print Speed15 pages per minute
Time to first page (black, normal)8.5 seconds or less
Output capacity100 sheets
First Print Out Time8.5 seconds
Operating System CompatibilityWindows, Mac, Linux

Related product manuals