What to do if Kyocera Copier says 'Paper cassette is out of order'?
If your Kyocera Copier displays 'Paper cassette is out of order' because the cassette currently in use is out of order and cannot be used, contact your service representative immediately. Continue copying using another cassette.
Why does my Kyocera All in One Printer say 'Ready to copy. Add toner'?
The message 'Ready to copy. Add toner' on your Kyocera All in One Printer indicates that the toner level is low. Replace the toner container immediately because only one copy can be made at a time.
How to fix 'Add paper in drawer' message on Kyocera All in One Printer?
The 'Add paper in drawer' message on your Kyocera All in One Printer means the indicated drawer or cassette is empty. Load paper into the drawer or cassette.
What to do if Kyocera All in One Printer shows 'System error. Main switch off/on'?
If your Kyocera All in One Printer displays the message 'System error. Main switch off/on', a system error has occurred. Turn the main power switch OFF and then ON to resolve the issue.
Why does my Kyocera All in One Printer say 'Check paper size'?
The 'Check paper size' message on your Kyocera All in One Printer indicates that the loaded paper is not suitable for the selected mode. Check the paper to ensure it meets the requirements.
How to close xxx cover x on Kyocera Copier?
If your Kyocera Copier displays 'Close xxx cover x', it means the indicated cover is open. Close the cover securely.
What does 'Ready to copy. Add toner' mean on my Kyocera Copier?
If your Kyocera Copier says 'Ready to copy. Add toner', it indicates low toner. Replace the toner container immediately, as only one copy can be made at a time.
What to do if Kyocera Copier exceeds pre registered copying quantity?
The message 'Exceeds pre registered copying quantity' on your Kyocera Copier means the number of copies has reached the limit set in the copy management mode. Clear the copy count from the management mode.
What to do if my Kyocera Copier shows a system error? (Kyocera)
If a system error occurs on your Kyocera Copier, turn the power switch OFF and then ON to attempt to resolve the issue.
Why does my Kyocera All in One Printer say 'Exceeds pre registered copying quantity'?
The message 'Exceeds pre registered copying quantity' on your Kyocera All in One Printer indicates that the copy limit set in the copy management mode has been reached, preventing further copies. Clear the copy count from the management mode to resolve this.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Technology | Laser |
| Print Speed | 35 ppm |
| Print Resolution | 1200 x 1200 dpi |
| First Print Out Time | 6.5 seconds |
| Max Copy Resolution | 600 x 600 dpi |
| Zoom Range | 25% - 400% |
| Scan Resolution | 600 x 600 dpi |
| Hard Drive | Optional |
| Operating System Compatibility | Windows, Mac, Linux |
| Warranty | 1 year |
| Type | Monochrome Laser Multifunction Printer |
| Copy Speed (Black) | 35 cpm |
| Paper Size | A3, A4, A5, B4, B5 |
| Interface | USB 2.0, Ethernet |
To Next Page
