Kyocera KM-5035 - Default Settings; Machine Default Settings

Section 6 COPIER MANAGEMENT FUNCTIONS
6-38
2. Default settings
The state that the copier enters at the end of warm-up or when the [Reset] key is pressed is called the “initial mode”. The modes, functions and other
settings that are automatically pre-set for the initial mode are called “default settings”. These default settings are separated into two categories:
“Copy defaults” and “Machine defaults” and can be changed as desired to suit your copying needs.
(1) Machine default settings
The following table indicates the machine default settings available in this copier. Change any or all of the settings as desired in order to make the
most effective use of your copier.
Default setting
Paper size
(drawer[cassette] No.1 –
No.4)
Day & time
Time difference
Changing the energy-
saving mode
Description
Sets the size of paper that is loaded in
drawers[cassettes] No.1 through No.4.
If you want the size to be detected automatically, select
“Auto Detection” (Automatic size detection). If you want
to manually set the size of paper, select “Standard
sizes”.
<If you select “Auto Detection”>
You can also select the desired unit of measurement:
“Inch” or “Centimeter”.
<If you select “Standard sizes”>
You can then select the paper size.
* The setting for drawer[cassette] No.3 and No.4 will only
be available when the optional Paper Feeder is
installed on your copier.
Sets the current date and time.
Sets the time difference from the world standard time
(GMT).
Changes the energy-saving mode that will be entered
into when the [Energy Saver] key is pressed.
* This setting is displayed when the optional Printer Kit
or Printer/Scanner Kit is installed.
If you are using a standard copier, or if the optional Fax
Kit is installed in your copier, you can press the
[Energy Saver] key to engage the Low power mode.
Available
settings
Auto Detection /
Standard sizes
Inch
Centimeter
A3
A4
A4R
A5R
B4
B5
B5R
Folio
11 x 17
8 1/2 x 14
11 x 8 1/2
8 1/2 x 11
5 1/2 x 8 1/2
8 1/2 x 13
8K
16K
Year: 2001-2049
Month: 1 – 12
Day: 1 – 31
Time: 00:00 – 23:59
+12:00 – -12:00
Low power mode
Sleep mode
Factory
setting
Auto Detection
Inch
specification:
Inch
Metric
specification:
Centimeter
– – –
Year: 2001
Month: 01
Day: 01
Time: 00:00
00:00
Low power
mode
Reference
page
6-40
6-41
6-42
6-43