Why Kyocera KM-2810 image size is shrunk vertically or horizontally on PC?
If an image sent from your Kyocera printer appears shrunk vertically or horizontally on your PC, and you have selected 200×100dpi Normal or 200×400dpi Super Fine for the scan resolution, select a different scan resolution when sending the image.
What to do if my Kyocera KM-2810 is not printing?
If your Kyocera printer is not printing, first, ensure the power cord is plugged into an AC outlet and that the main power switch is turned on. Check that the printer cable is securely connected. If the printer cable was connected before powering on the machine, power cycle the printer. Finally, verify that the print job is not paused; if it is, press the Resume key to resume printing.
What to do if my Kyocera Printer printouts are too light?
If your Kyocera printer's printouts are too light, several factors could be the cause. If the machine is in Auto Density mode, set the correct density level. If it's in Manual Density mode, select the correct density level. Shake the toner container from side to side to distribute the toner evenly. If there's a message indicating the need for toner, replace the toner container. Damp paper can also cause light prints, so replace the paper with new paper. Finally, check if EcoPrint mode is enabled and, if so, disable it.
How to fix dirty printouts from Kyocera Printer?
If your Kyocera printer produces dirty printouts, the platen or document processor may be dirty, so clean them. Also, the charger wire could be dirty, so ensure you clean that as well.
What to do if my Kyocera KM-2810 Printer printouts are too dark?
If your Kyocera printer's printouts are too dark, it could be due to the density settings. If the machine is in Auto Density mode, set the correct density level. If the machine is in Manual Density mode, select the correct density level.
Why my Kyocera KM-2810 cannot send fax?
If your Kyocera printer cannot send a fax, ensure the modular cord is connected correctly. Also, check Permitted FAX No. and Permitted ID No..
How to resolve 'Send error. ####' on Kyocera Printer?
If your Kyocera printer displays the error 'Send error. ####', use COMMAND CENTER and register the SMTP server name and the host name correctly because the server name of the SMTP server is not set correctly or the host name is incorrect when sending scan data to an FTP server.
How to resolve 'Insufficient memory. Cannot start the job' message on Kyocera Printer?
If your Kyocera printer displays the message 'Insufficient memory. Cannot start the job', press the OK key to print the scanned pages or press the Cancel key to cancel the printing job.
Why are my Kyocera KM-2810 images skewed?
Skewed images from your Kyocera printer can result from incorrect placement of the originals or improperly loaded paper. When placing originals on the platen, ensure they are aligned with the original size indicator plates. Also, check the position of the paper width guides to ensure the paper is loaded correctly.
How to resolve 'Load paper in MP Tray' error on Kyocera Printer?
If your Kyocera printer displays the 'Load paper in MP Tray' message, load the paper in the multi purpose tray which is of the size and type indicated on the Message Display.
To Next Page
General
