Kyocera KM-2810 - Detaching and Refitting the Exposure Lamp and Inverter PWB

2H9
1-5-27
(5) Detaching and refitting the exposure lamp and inverter PWB
Procedure
1. Remove the original cover (See page 1-5-
13).
2. Move the image scanner unit (ISU) unit to
the center.
3. Unhook five hooks and then remove the
lamp mount.
4. Remove the connector.
Figure 1-5-40
Hook
Hook
Hook
Hook
Hook
Lamp mount
Connector
Image scanner
unit (ISU)
Image scanner
unit (ISU)