To Next Page
J
Jacqueline GomezSep 8, 2025
Why does my Kyocera KM-2810 Printer printouts are wrinkled?
- DDavid JonesSep 8, 2025
If your Kyocera printer's printouts are wrinkled, it's likely due to damp paper. Replace the paper with new paper.
Why does my Kyocera KM-2810 Printer printouts are wrinkled?
If your Kyocera printer's printouts are wrinkled, it's likely due to damp paper. Replace the paper with new paper.
Why Kyocera Printer pressing the Start key does not produce copies?
If pressing the Start key on your Kyocera printer does not produce copies, determine the appropriate response to any message displayed and respond accordingly. If the machine is in Sleep mode, press the Power key to recover it; it will be ready to copy within 45 seconds. Also, ensure the connector of the Document Processor is securely connected to the machine.
Why does my Kyocera KM-2810 paper often jam?
Paper jams in your Kyocera printer can occur for several reasons. Ensure the paper is loaded correctly. The paper may be an unsupported type or in poor condition, so try removing it, turning it over, and reloading it. If the paper is curled, folded, or wrinkled, replace it with new paper. Also, check for and remove any loose scraps or jammed paper inside the machine.
How to resolve 'Top tray is full of Paper. Remove the paper' message on Kyocera KM-2810?
If your Kyocera printer displays the message 'Top tray is full of Paper. Remove the paper', remove paper from the top tray, and press the OK key to resume the job.
How to resolve 'Load paper in MP Tray' error on Kyocera Printer?
If your Kyocera printer displays the 'Load paper in MP Tray' message, load the paper in the multi purpose tray which is of the size and type indicated on the Message Display.
How to fix fuzzy printouts from Kyocera KM-2810 Printer?
If your Kyocera printer produces fuzzy printouts, and the machine is being used in very humid conditions, clean the charger wire.
How to resolve 'Add toner' message on Kyocera KM-2810 Printer?
If your Kyocera printer displays the 'Add toner' message, replace the toner container.
How to resolve 'Load paper in cassette 1' error on Kyocera Printer?
If your Kyocera printer displays the 'Load paper in cassette 1' message, it means the indicated cassette is out of paper. Simply load paper into the cassette.
How to fix vertical streaks on Kyocera Printer prints?
If you are seeing vertical streaks on your Kyocera printer prints, the inside of the machine may be dirty. Check the toner container and replace it if necessary. Also, clean the charger wire. Ensure that the main charger cleaner of the drum unit is in its original position.
What to do if my Kyocera KM-2810 Printer printouts are too dark?
If your Kyocera printer's printouts are too dark, it could be due to the density settings. If the machine is in Auto Density mode, set the correct density level. If the machine is in Manual Density mode, select the correct density level.
General
